Transfer Reduction Driven Gear: Assembly
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new ball bearing (large) to transfer reduction driven gear using the ST.CAUTION:
- Before press-fitting the ball bearing, apply CVTF to press-fitting surface.
- Use SUBARU genuine CVTF.
NOTE: Install to the splines inside transfer reduction driven gear.Preparation tool:
ST: BUSHING 1-2 INSTALLER (499277100)
- Install the new ball bearing (small) to transfer reduction driven gear using the ST.CAUTION:
- Before press-fitting the ball bearing, apply CVTF to press-fitting surface.
- Use SUBARU genuine CVTF.
Preparation tool:
ST: BUSHING 1-2 INSTALLER (499277100)