Door Step Light: Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .

Remove the light assembly door step.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.

Release the claws, and remove the light assembly door step.

Courtesy of SUBARU OF AMERICA, INC.

Disconnect the connector.

Remove the light assembly door step and the bulb.

Courtesy of SUBARU OF AMERICA, INC.