Master Cylinder: Assembly

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the seal reservoir to the master cylinder assembly.
Install the oil reservoir COMPL.
CAUTION: Be careful not to tighten a vise excessively.
1. Place the master cylinder assembly between aluminum plates and fix it on a vise.
2. Tighten the oil reservoir screw using a driver to install the oil reservoir COMPL.
  Tightening torque:
  
  5.5 N.m (0.6 kgf-m, 4.1 ft-lb)