USB Power Supply

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

FRONT
1. Install the AUX unit assembly.
2. Install the switch panel front.
3. Install the cover center side.
4. Install the cover instrument panel CTR.
5. Install the cover assembly front and the console box assembly. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>INSTALLATION .
6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
CENTER
1. Install the AUX unit assembly and the cover rear console assembly. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>ASSEMBLY .
2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
REAR
1. Install the AUX unit assembly.
2. Install the trim panel rear apron RH. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION .
3. Install the third seats. Ref. to SEATS>Third Seat>INSTALLATION .
4. Install the floor mat side, floor mat center, and box sub-trunk assembly.
5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .