LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Theft System - Security And Locks) >> Keyless Access Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access Control Module: Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover side sill front FR and the cover side sill front RR. Ref. to EXTERIOR/INTERIOR TRIM>Lower Inner Trim>REMOVAL
  3. Remove the pocket COMPL and the panel instrument passenger. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>REMOVAL .
  4. Remove the keyless access control module.
    CAUTION: Be careful to keep water and other foreign materials away from the keyless access control module terminals  .
    1. Remove the bolts and pull out the keyless access control module.
    2. Disconnect the connector.
G13201481Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals