LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Transmission Control Systems) >> Select Cable >> Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Adjustment

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the shift lock using a screwdriver, etc. and shift the select lever to the "N range".
    G13199468Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the center exhaust cover (front). Ref. to EXHAUST (H4DOTC)>Rear Exhaust Pipe>REMOVAL .
  3. Loosen the adjusting nut (front) and adjusting nut (rear).
    G13225519Courtesy of SUBARU OF AMERICA, INC.
  4. Turn the adjusting nut (front) until it lightly touches the connector pin.
    G13863685Courtesy of SUBARU OF AMERICA, INC.
  5. While holding the adjusting nut (front) in place, tighten the adjusting nut (rear).

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

    G13225521Courtesy of SUBARU OF AMERICA, INC.
  6. After the completion of adjustment, check that the select lever operates normally at all ranges.
scientia non olet · About LEMON Manuals