Inspection Mode D
| DTC | Description & trouble part | Condition |
|---|---|---|
| P0712 | TRANSMISSION FLUID TEMPERATURE SENSOR "A" CIRCUIT LOW | - |
| P0713 | TRANSMISSION FLUID TEMPERATURE SENSOR "A" CIRCUIT HIGH | - |
Diagnostic procedure:
- Start the engine under condition that ATF temperature is at 10°C (50°F) or more.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .
- Using the Subaru Select Monitor, perform the clear memory of [Transmission]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
.CAUTION: After performing the clear memory, do not turn the ignition switch to OFF.
- Wait at least 10 seconds.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is completed. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .