Unit Inspection
- Check the inhibitor switch signal circuit.
- Check the circuit of each range.NOTE: If faulty, check the transmission harness for open circuit or short circuit, or poor contact.
- P range
Terminal No. Inspection conditions Standard 2 - 6 P range Less than 1 Ω Except for P range 1 MΩ or more 4 - 5 P range Less than 1 Ω Except for P range 1 MΩ or more - R range
Terminal No. Inspection conditions Standard 2 - 1 R range Less than 1 Ω Except for R range 1 MΩ or more - N range
Terminal No. Inspection conditions Standard 2 - 9 N range Less than 1 Ω Except for N range 1 MΩ or more 4 - 5 N range Less than 1 Ω Except for N range 1 MΩ or more - D range and M range
- P range
- Check the circuit of each range.
| Terminal No. | Inspection conditions | Standard |
|---|---|---|
| 2 - 7 | D range | Less than 1 Ω |
| M range (when shifted to "+" or "-") | ||
| Except for D range | 1 MΩ or more | |
| M range (except for when shifted to "+" or "-") |