Data Monitor: List
| Display | Contents | Standard | Note | ||
|---|---|---|---|---|---|
| Battery Voltage | Battery voltage is displayed. | 0 - 25.5 V | - | ||
| Ignition SW | Ignition switch status is displayed. | ON: When ignition switch is ON OFF: When ignition switch is OFF |
- | ||
| Set SW | Status of the set switch in seat memory switch is displayed. | ON: When set switch is ON OFF: When set switch is OFF |
- | ||
| Memory SW1 | Status of the memory switch 1 in seat memory switch is displayed. | ON: When memory switch 1 is ON OFF: When memory switch 1 is OFF |
- | ||
| Memory SW2 | Status of the memory switch 2 in seat memory switch is displayed. | ON: When memory switch 2 is ON OFF: When memory switch 2 is OFF |
- | ||
| Slide SW | Status of the slide switch in power seat switch is displayed. | OFF: When slide switch is OFF FRONT: When slide switch (forward) is ON REAR: When slide switch (rearward) is ON |
- | ||
| Reclining SW | Status of the reclining switch in power seat switch is displayed. | OFF: When reclining switch is OFF FRONT: When reclining switch (forward) is ON REAR: When reclining switch (backward) is ON |
- | ||
| Lifter SW | Status of the lifter switch in power seat switch is displayed. | OFF: When lifter switch is OFF UP: When lifter switch (up) is ON DOWN: When lifter switch (down) is ON |
- | ||
| Tilt SW | Status of the tilt switch in power seat switch is displayed. | OFF: When tilt switch is OFF UP: When tilt switch (up) is ON DOWN: When tilt switch (down) is ON |
- | ||
| Pulse Power Circuit | Motor pulse sensor power supply circuit status is displayed. | Normal: At normal condition Abnormal: Abnormal |
- | ||
| Slide Output | Power seat control module output status is displayed. (Slide motor) | OFF: When set to OFF FRONT: When moved forward REAR: When moved rearward |
- | ||
| Reclining Output | Power seat control module output status is displayed. (Reclining motor) | OFF: When set to OFF FRONT: When moved forward REAR: When moved rearward |
- | ||
| Lifter Output | Power seat control module output status is displayed. (Lifter motor) | OFF: When set to OFF UP: When moved upward DOWN: When moved downward | - | ||
| Tilt Output | Power seat control module output status is displayed. (Tilt motor) | OFF: When set to OFF UP: When moved upward DOWN: When moved downward | - | ||
| Memory SW1 Memorized | Registration status of the memory switch 1 in seat memory switch | Yes: When registered No: When not registered | - | ||
| Memory SW2 Memorized | Registration status of the memory switch 2 in seat memory switch | Yes: When registered No: When not registered | |||
| Keyless Access & Start Link 1 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
Seat memory operates when the key No. displayed in the Keyless Access Key Information is registered in the item shown on the left. | ||
| Keyless Access & Start Link 2 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered | |||
| Keyless Access & Start Link 3 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered | |||
| Keyless Access & Start Link 4 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered | |||
| Keyless Access & Start Link 5 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered | |||
| Keyless Access & Start Link 6 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered | |||
| Keyless Access & Start Link 7 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered | |||
| Keyless Access Key Information | Key No. currently identified by the vehicle is displayed. | Without: When there is no registered key Keyless Access & Start Link 1: When the registered key No. 1 is detected Keyless Access & Start Link 2: When the registered key No. 2 is detected Keyless Access & Start Link 3: When the registered key No. 3 is detected Keyless Access & Start Link 4: When the registered key No. 4 is detected Keyless Access & Start Link 5: When the registered key No. 5 is detected Keyless Access & Start Link 6: When the registered key No. 6 is detected Keyless Access & Start Link 7: When the registered key No. 7 is detected | - | ||
| Slide Position | Slide motor position is displayed. | -32768 - 32767 | - | ||
| Reclining Position | Reclining motor position is displayed. | -32768 - 32767 | - | ||
| Lifter Position | Lifter motor position is displayed. | -32768 - 32767 | - | ||
| Tilt Position | Tilt motor position is displayed. | -32768 - 32767 | - | ||
| LIN Ignition Signal | Ignition switch LIN signal is displayed. | ON: When ignition switch is ON OFF: When ignition switch is OFF |
- | ||
| Ignition SW Signal | Ignition switch direct line signal is displayed. | ON: When ignition switch is ON OFF: When ignition switch is OFF |
- | ||
| Seat back setting | Seat retraction setting status is displayed. | ON: When seat retraction setting is ON OFF: When seat retraction setting is OFF |
- | ||
| ACC SW | Statuses of ACC switch LIN signal and direct line signal are displayed. | OFF: When ACC switch is OFF Mismatch: When ACC switch signal does not match ON: When ACC switch is ON |
- | ||
| LIN ACC Signal | ACC SW LIN signal is displayed. | ON: When ACC switch is ON OFF: When ACC switch is OFF |
- | ||
| ACC SW Signal | Ignition switch direct line signal is displayed. | ON: When ACC switch is ON OFF: When ACC switch is OFF |
- | ||
| Brake Lamp SW Signal | Brake light SW status is displayed. | ON: When brake light switch is ON OFF: When brake light switch is OFF |
- | ||
| Smart Key Adoption | Presence/absence signal of keyless access with push button start is displayed. | Not Smart: Without keyless access with push button start Smart: With keyless access with push button start | - | ||
| MT/AT Signal | MT/AT signal is displayed. | MT: MT model AT: Other than MT model |
- | ||
| Parking Break Switch Signal | Parking brake switch signal is displayed. | ON: When parking brake switch is ON OFF: When parking brake switch is OFF |
- | ||
| EPB Status Signal | Electronic parking brake status signal is displayed. | ERROR: When electronic parking brake error occurs Release: When electronic parking brake is released Operate: When electronic parking brake is operated Operating: While electronic parking brake is being operated Releasing: While electronic parking brake is being released Dynamic Parking: When electronic parking brake is in dynamic parking operation | - | ||
| Shift Position Signal | Shift position signal is displayed. | D: When shift position is in D N: When shift position is in N R: When shift position is in R P: When shift position is in P L: When shift position is in L |
- | ||
| Vehicle Speed Signal | Vehicle speed signal is displayed. | 0 - 3986.34 km/h (MPH) | - | ||
| Remote Engine Starter Status Signal | Remote control engine starter signal is displayed. | ON: When remote control engine starter is ON OFF: When remote control engine starter is OFF |
- | ||
| Driver's Door Open Status Signal | Driver's door open/close signal is displayed. | Open: When driver's door is open Close: When driver's door is closed |
- | ||
| Driver's Door Lock Status Signal | Driver's door lock status is displayed. | Lock: When driver's door is locked Unlock: When driver's door is unlocked |
- | ||
| Remote Control Key Door Lock Output Lock Signal | Remote control key door lock output status is displayed. | Output Off: Remote control key door lock output is not performed Output On: Remote control key door lock output is performed | - | ||
| Trigger SW Door Lock Output Lock Signal | Trigger switch door lock output status is displayed. | Output Off: Trigger switch door lock output is not performed Output On: Trigger switch door lock output is performed | - | ||
| Remote Control Key Door Lock Output Unlock Signal | Remote control key door unlock output status is displayed. | Output Off: Remote control key door unlock output is not performed Output On: Remote control key door unlock output is performed | - | ||
| Trigger SW Door Lock Output Unlock Signal | Trigger switch door unlock output status is displayed. | Output Off: Trigger switch door unlock output is not performed Output On: Trigger switch door unlock output is performed | - | ||
| Customize Change Request Signal: Seat Back Function | Seat retraction function change request signal is displayed. | Not Required: Seat retraction function change is not requested Required: Seat retraction function change is requested | - | ||
| Current User | The current customize setting user is displayed. | Indefinite: Unregistered user Memory SW1: Seat Memory SW1 user Memory SW2: Seat Memory SW2 user Memory SW3: Seat Memory SW3 user KEY1: Keyless access link 1 user KEY2: Keyless access link 2 user KEY3: Keyless access link 3 user KEY4: Keyless access link 4 user KEY5: Keyless access link 5 user KEY6: Keyless access link 6 user KEY7: Keyless access link 7 user DriverMonitorSystem1: DMS1 user DriverMonitorSystem2: DMS2 user DriverMonitorSystem3: DMS3 user DriverMonitorSystem4: DMS4 user DriverMonitorSystem5: DMS5 user |
- | ||
| Seat Slide Target Position | Seat slide target position is displayed. | -32768 - 32767 | - | ||
| Seat Reclining Target Position | Seat reclining target position is displayed. | -32768 - 32767 | - | ||
| Seat Lifter Target Position | Seat lifter target position is displayed. | -32768 - 32767 | - | ||
| Seat Tilt Target Position | Seat tilt target position is displayed. | -32768 - 32767 | - | ||
| Steering Wheel Information Signal | Steering wheel position signal is displayed. | LHD: LHD model RHD: RHD model |
- | ||
| MT Reverse Switch Signal | MT vehicle reverse switch signal is displayed. | ON: When reverse switch is ON OFF: When reverse switch is OFF |
- | ||
| Customize Change Request Signal: Mirror Function | Door mirror customize setting change request signal is displayed. | Not Required: When mirror setting change is not requested Required: When mirror setting change is requested | - | ||
| Customize Change Value: Side Mirror Auto Folding(1) | Door mirror electric retraction system change value is displayed. | OFF: When electric retraction system setting is OFF ON: When electric retraction system setting is ON |
- | ||
| Customize Change Value: Side Mirror Tilt Down in Reverse | Door mirror reverse link change value is displayed. | OFF: Mirror customized reverse link change value is OFF ON: Mirror customized reverse link change value is ON |
- | ||
| Customize Change Request Signal: Mirror Function Reset | Door mirror customization reset request signal is displayed. | Not Required: When reset is not requested Required: When reset is requested | - | ||
| Auto Retractable Power Outside Mirror Customize(1) | Automatic electric retraction system setting is displayed. | OFF: When automatic electric retraction is OFF ON: When automatic electric retraction is ON |
- | ||
| Reverse Interlocking Outside Mirror Customize | Reverse-linked door mirror setting is displayed. | OFF: Linkage with reverse operation is OFF ON: Linkage with reverse operation is ON |
- | ||
| Reverse Interlocking Outside Mirror Target Customize | Reverse-linked target door mirror setting is displayed. | Both Seats: When both door mirrors are set Passenger: When passenger's door mirror is set | - | ||
| Reverse Interlocking Outside Mirror Last Memory Customize | Reverse-linked door mirror position last memory setting is displayed. | ON: When last memory setting is ON OFF: When last memory setting is OFF |
- | ||
| Mirror SW Input Status | Door mirror switch input status is displayed. | No Operation: Unoperated state Indefinite: Unconfirmed state Up D MIR: Driver's side mirror up direction input Down D MIR: Driver's side mirror down direction input Right D MIR: Driver's side mirror right direction input Left D MIR: Driver's side mirror left direction input Up P MIR: Passenger's side mirror up direction input Down P MIR: Passenger's side mirror down direction input Right P MIR: Passenger's side mirror right direction input Left P MIR: Passenger's side mirror left direction input | - | ||
| Mirror D Vertical Output Direction | Driver's side door mirror up/down direction output status is displayed. | No Output: No output UP: Up direction output DOWN: Down direction output | - | ||
| Mirror D Horizontal Output Direction | Driver's side door mirror left/right direction output status is displayed. | No Output: No output RIGHT: Right direction output LEFT: Left direction output | - | ||
| Mirror P Vertical Output Direction | Passenger's side door mirror up/down direction output status is displayed. | No Output: No output UP: Up direction output DOWN: Down direction output | - | ||
| Mirror P Horizontal Output Direction | Passenger's side door mirror left/right direction output status is displayed. | No Output: No output RIGHT: Right direction output LEFT: Left direction output | - | ||
| Mirror D Sensor Target Vertical Position | Reloading target position corresponding to the current user is displayed (up/down). | 0.000 - 5.000 V | - | ||
| Mirror D Sensor Target Horizontal Position | Reloading target position corresponding to the current user is displayed (left/right). | 0.000 - 5.000 V | - | ||
| Mirror P Sensor Target Vertical Position | Reloading target position corresponding to the current user is displayed (up/down). | 0.000 - 5.000 V | - | ||
| Mirror P Sensor Target Horizontal Position | Reloading target position corresponding to the current user is displayed (left/right). | 0.000 - 5.000 V | - | ||
| Mirror D Sensor Target Vertical Position at R | Reloading target position corresponding to the current user is displayed (up/down). | 0.000 - 5.000 V | - | ||
| Mirror D Sensor Target Horizontal Position at R | Reloading target position corresponding to the current user is displayed (left/right). | 0.000 - 5.000 V | - | ||
| Mirror P Sensor Target Vertical Position at R | Reloading target position corresponding to the current user is displayed (up/down). | 0.000 - 5.000 V | - | ||
| Mirror P Sensor Target Horizontal Position at R | Reloading target position corresponding to the current user is displayed (left/right). | 0.000 - 5.000 V | - | ||
| Mirror D Sensor Current Vertical Position | Driver's side door mirror position is displayed (up/down). | 0.000 - 5.000 V | - | ||
| Mirror D Sensor Current Horizontal Position | Driver's side door mirror position is displayed (left/right). | 0.000 - 5.000 V | - | ||
| Mirror P Sensor Current Vertical Position | Passenger's side door mirror position is displayed (up/down). | 0.000 - 5.000 V | - | ||
| Mirror P Sensor Current Horizontal Position | Passenger's side door mirror position is displayed (left/right). | 0.000 - 5.000 V | - | ||
| Mirror D Reverse Position Memorized | Presence or absence of reverse-linked door mirror position memory is displayed (driver's side). | Yes: When memory is present No: When memory is not present |
- | ||
| Mirror P Reverse Position Memorized | Presence or absence of reverse-linked door mirror position memory is displayed (passenger's side). | Yes: When memory is present No: When memory is not present |
- | ||
| ID REGIST FLAG | ID setting signal is displayed. | DEFAULT: Default No Definition: Undefined state ID Registration: ID registered state ID Customize Editing: Customization registered state ID Delete Select: Selected ID deleted state Customize Delete Select: Selected customization deleted state ID Delete All: All IDs are deleted | - | ||
| DRIVER REGIST ID | Driver ID is displayed. | DEFAULT: Default ID1: ID1 user ID2: ID2 user ID3: ID3 user ID4: ID4 user ID5: ID5 user No Definition: Undefined ALL ID: All users Identifying: ID recognition in-progress |
- | ||
| DMS Recognition Status | Personal recognition status is displayed. | OFF: Personal recognition OFF status ON: Personal recognition ON status |
- | ||
| DMS 1 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS1 memory is present No: DMS1 memory is not present |
- | ||
| DMS 2 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS2 memory is present No: DMS2 memory is not present |
- | ||
| DMS 3 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS3 memory is present No: DMS3 memory is not present |
- | ||
| DMS 4 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS4 memory is present No: DMS4 memory is not present |
- | ||
| DMS 5 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS5 memory is present No: DMS5 memory is not present |
- | ||
| Customize Flag | Customized setting status is displayed. | DEFAULT: Initial value Customize Present: Customization is being performed Customize Complete: Customization completed state Customize Fail: Customization failed state | - | ||
|
|||||