Auto Vehicle Hold (AVH) System

Check that the AVH system is activated and deactivated correctly.

• Press the AVH switch in the center information display (CID), and check that the AVH ON indicator illuminates in the combination meter.

• Check that the vehicle hold condition is still maintained when the following conditions are met and the brake pedal is released.
  • Engine running status or Auto Start Stop status
  • Select lever is in position other than "P"
  • Seat belt is fastened
  • Driver's door is closed
• Check that the AVH indicator illuminates in the combination meter while in the vehicle hold condition.
• Check that the vehicle hold condition is deactivated by depressing the accelerator pedal in the vehicle hold condition. Depress the brake pedal after checking deactivation.
• After the inspection, press the AVH switch in the center information display (CID) with the brake pedal depressed, and check that the AVH ON indicator illuminates in the combination meter.