LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> WRX Limited, Standard Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Stabilizer >> Installation >> Stabilizer Bushing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Stabilizer Bushing

CAUTION:
  • Install the rubber bushing stabilizer rear so that the slit does not shift to the right or left. 
  • Install the clamp stabilizer with the peak of triangle facing the front of the vehicle. 
G14601812Courtesy of SUBARU OF AMERICA, INC.
  1. Before installation, check the rubber bushing stabilizer rear for abnormal cracks, fatigue or damage.
  2. Install the rubber bushing stabilizer rear.
  3. Install the clamp stabilizer.

    Tightening torque: 

    30 N.m (3.1 kgf-m, 22.1 ft-lb)

scientia non olet · About LEMON Manuals