LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Mass Air Flow and Intake Air Temperature Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the mass air flow and intake air temperature sensor.
    G13198310Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals