On The Car Wheel Balancing
CAUTION:
- Be sure to carry out the procedures after measuring the balance of each single tire.
- Set the vehicle so that the front and rear wheels are the same height.
- Make sure that the VSC (VDC) is deactivated.
- Release the parking brake during measurement.
- Rotate each wheel by hands, and make sure it rotates without dragging.
- Do not operate the clutch quickly and do not accelerate or decelerate suddenly during work.
- Jack up the non-measuring side (front wheels or rear wheels) and set the rigid racks.
- Set the pickup stands to two wheels of the measuring side (front wheels or rear wheels).
(A) Balancer body (B) Pickup stand (right and left) - For drive wheel, drive the tires with engine for measurement.
- For non-drive wheel, drive the tires from the on the car wheel balancer for measurement.