Power Seat Memory System (Diagnostics)
- Basic Diagnostic Procedure
- Check List for Interview
- General Description
- Electrical Component Location
- Control Module I/O Signal
- Inspection Mode
- Diagnostic Procedure for Subaru Select Monitor Communication
- Data Monitor
- Freeze Frame Data
- Active Test
- Customize
- Work Support
- Diagnostic Trouble Code (DTC)
- Diagnostic Procedure with Diagnostic Trouble Code (DTC)
- DTC B2600: Lin Communication
- DTC B2601: Lin Circuit Low
- DTC B2602: Vehicle Speed Control
- DTC B2603: EPB Control
- DTC B2604: Power Seat Memory EEPROM
- DTC B2605: Battery Control Low
- DTC B2606: Power Seat Position Sensor Circuit Low
- DTC B2607: Seat Motor Relay Failure
- DTC B2608: Seat SW Failure
- DTC B2609: IG
- DTC B260A: Acc
- DTC B2621: Mirror SW Anomalous State
- DTC B2631: Mirror D Motor Circuit Anomalous State
- DTC B2632: Mirror D Sensor Circuit Anomalous State
- DTC B2641: Mirror P Motor Circuit Anomalous State
- DTC B2642: Mirror P Sensor Circuit Anomalous State
- Diagnostics with Phenomenon
- List
- Inspection
- Mirror Surface Does Not Move When Operated Manually (Both Sides/One Side)
- Mirror Surfaces Position Is Not Restored Or Recovered While Being Linked With Reverse Operation (Manual Operation Is Possible)
- Mirror Surface Moves Automatically
- Memory Is Not Reloaded For The Mirror Surface Only (Manual Operation Is Possible)
- Cannot Be Customized (Manual Operation Is Possible)
- The Mirror Position Cannot Be Restored/Registered With The Memory Switch
- The Mirror Position Cannot Be Restored/Registered With The Smart Key
- The Mirror Position Cannot Be Restored/Registered With The Driver Monitoring System