Wheel Alignment: Inspection: Camber
- Place the tires on the turning radius gauge.NOTE: Make sure that the ground contact surfaces of the front tires and rear tires are at the same level.
- Set the alignment gauge adapter into the center of wheel, and then set the alignment gauge.
(a) Alignment gauge (b) Turning radius gauge (c) Alignment gauge adapter - Measure the camber angle in accordance with the operation manual for alignment gauge.
| Model | Front camber (difference between RH and LH 45' or less) | Rear camber (difference between RH and LH 45' or less) |
|---|---|---|
| Except for WILDERNESS model | -0°05'±0°45' | -0°55'±0°45' |
| WILDERNESS model | 0°10'±0°45' | -0°35'±0°45' |