Ignition Switch Testing
Disconnect ignition switch connectors. Using an ohmmeter, check continuity across switch terminals. See IGNITION SWITCH CONTINUITY table.
IGNITION SWITCH CONTINUITY
| Switch Position | Terminal-To-Terminal (Wire Color) | |||
|---|---|---|---|---|
| Samurai | ||||
| Off | BLK/GRN-BLK | |||
| ACC | WHT/YEL-BLU | |||
| On | WHT/YEL-BLU-BLK/BLU | |||
| Start | WHT/YEL-BLK/BLU-BLK/RED | |||
| Sidekick | ||||
| Off | (1) | |||
| ACC | WHT/GRN-BLU | |||
| On | WHT/GRN-BLU-BLK/BLU-YEL/BLK, WHT-BLU/BLK | |||
| Start | WHT/GRN-BLK/BLU-BLK/RED, VIO/RED-BLK | |||
| Swift | ||||
| Off | (1) | |||
| ACC | WHT/GRN-BLU | |||
| On | WHT/GRN-BLU-BLK/BLU-YEL/BLK, WHT-BLU/BLK | |||
| Start | WHT/GRN-BLK/BLU-BLK/YEL | |||
|
||||