LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Swift GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 1.3L DOHC >> Ignition Checks >> Idle Speed & Ignition Timing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Idle Speed & Ignition Timing

Ensure idle speed and base ignition timing are set to specification. Refer to the IDLE SPEED SPECIFICATIONS  table and the IGNITION TIMING  tables below in this article. Also, if necessary, see the ADJUSTMENTS - 1.3L DOHC article in this section.

IDLE SPEED SPECIFICATIONS (1)

Application Idle RPM
With A/C Off 800-900
With A/C On (2) 850-950
(1) Transaxle or transmission in Neutral or Park.
(2) A/C idle speed is adjusted by rotating adjusting screw on A/C Vacuum Switching Valve (VSV).
IGNITION TIMING (Degrees BTDC @ RPM)

Application Man. Trans. Auto. Trans.
DOHC (1) 5-7 @ 800-900 (1) 5-7 @ 800-900
(1) With jumper wire installed between "D" and "E" terminals of test connector, located near ignition coil
scientia non olet · About LEMON Manuals