October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Speed Sensor With Automatic Transaxle

REMOVAL
1. Disconnect negative cable at battery.
2. Disconnect A/T VSS coupler.

3. Remove A/T VSS by removing its bolt.

INSTALLATION
1. Apply A/T fluid to A/T VSS O-ring.

2. Install A/T VSS to A/T case and tighten bolt to specified torque.
Tightening Torque
(a): 5.5 Nm (0.55 kg.m, 4.0 ft. lbs.)
3. Connect A/T VSS coupler to A/T VSS.
4. Connect negative cable to battery.