LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Vitara JLS, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications >> Fuel System >> Throttle Position (TP) Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Position (TP) Sensor

THROTTLE POSITION (TP) SENSOR RESISTANCE (1)

Application Ohms
Esteem
Between Terminals No. 1 & 2 2500-6000
Between Terminals No. 1 & 3 (2) 100-20,000
Grand Vitara
Between Terminals No. 1 & 3 4000-6000
Between Terminals No. 2 & 3 (2) 0-4600
Swift (3)
Vitara
Between Terminals No. 1 & 3 4000-6000
Between Terminals No. 1 & 2 (2) 20-6000
(1) See Fig 1 for terminal identification.
(2) Depending on degree of throttle opening.
(3) Information is not available from manufacturer.
Fig 1: Identifying Throttle Position (TP) Sensor Terminals (Typical)
G98C10654Courtesy of SUZUKI OF AMERICA CORP.
NOTE: See PIN VOLTAGE/CIRCUIT RESISTANCE CHARTS article and appropriate wiring diagrams in WIRING DIAGRAMS article for PCM connector and wire terminal identification.
THROTTLE POSITION (TP) SENSOR VOLTAGE (1)

Application Volts
Esteem (1.8L) & Grand Vitara (2)
At Idle .35-.65
At Wide Open Throttle 3.5-4.5
(1) Ignition on and engine off.
(2) Measure voltage at ECM connector terminal No. C20-25 (Esteem 1.8L) or C51-3-12 (Grand Vitara). See PIN VOLTAGE/CIRCUIT RESISTANCE CHARTS article.
scientia non olet · About LEMON Manuals