July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Control Module (ECM) Removal and Installation: Installation

Reverse removal procedure noting the following:

Connect connectors to ECM as follows.
1. Make sure that lock lever of ECM connector is unlock position.
  
  Fig 1: Ensuring Lock Lever Of ECM Connector Is In Unlock Position
  Courtesy of SUZUKI OF AMERICA CORP.
2. Insert ECM connectors to ECM until it stops with unlocked lock lever.
  
  Fig 2: Inserting ECM Connectors To ECM
  Courtesy of SUZUKI OF AMERICA CORP.
3. Lock ECM connectors securely by pulling its lock lever up.
  
  Fig 3: Locking ECM Connectors
  Courtesy of SUZUKI OF AMERICA CORP.