LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Premium, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Knock Sensor Replacement - Bank 2 >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

Fig 1: Identifying Engine Wiring Harness Electrical Connector
G05469915Courtesy of SUZUKI OF AMERICA CORP.
  1. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Disconnect the engine wiring harness electrical connector (2) from the bank 2 knock sensor.
    Fig 2: Identifying Knock Sensor Bolt
    G05469916Courtesy of SUZUKI OF AMERICA CORP.
  3. Loosen the knock sensor bolt and remove the knock sensor.
scientia non olet · About LEMON Manuals