ECM (Engine Control Module) Removal and Installation: Installation

Reverse removal procedure noting the following.

• Connect connectors to ECM as follows.
  1. Make sure that lock lever of ECM connector is in unlock position.
  Fig 1: Connecting Connectors To ECM
  Courtesy of SUZUKI OF AMERICA CORP.
  2. Insert ECM connectors to ECM until it stops.
     Fig 2: Inserting ECM Connectors To ECM Until

     Courtesy of SUZUKI OF AMERICA CORP.
  3. Lock ECM connectors securely by setting their lock levers in their locked position.
     Fig 3: Locking ECM Connectors

     Courtesy of SUZUKI OF AMERICA CORP.