LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Kizashi SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> APP Sensor Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

APP Sensor Inspection

  1. Remove accelerator pedal assembly, see Accelerator Pedal Assembly (Incorporating APP Sensor) Removal and Installation .
  2. Check APP sensor output voltage as follows.

    If faulty condition is found, replace accelerator pedal assembly (incorporated with APP sensor), see Accelerator Pedal Assembly (Incorporating APP Sensor) Removal and Installation .

    1. Connect 3 new 1.5 V batteries (1) in series and check that total voltage is 4.5 - 5.0 V.
    2. Connect voltmeter (2) and batteries to APP sensor as shown in figure.
      Fig 1: Checking APP Sensor Output Voltage
      G06528131Courtesy of SUZUKI OF AMERICA CORP.
    3. Check that voltage varies depending on accelerator opening angle as the following graph.
Fig 2: APP Sensor Voltage Graph
G06528132Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals