LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> SX4 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> Crankshaft Position (CKP) Sensor Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position (CKP) Sensor Removal and Installation: Removal

  1. Disconnect negative cable at battery.
  2. Remove generator. See GENERATOR REMOVAL AND INSTALLATION
  3. Disconnect CKP sensor connector.
  4. Remove CKP sensor (1) from cylinder block.
scientia non olet · About LEMON Manuals