LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 LE, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> Engine Control Module (ECM) Removal and Installation >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Control Module (ECM) Removal and Installation: Removal

  1. Remove battery, see BATTERY REMOVAL AND INSTALLATION .
  2. Disconnect connectors from ECM as follows.
    1. Push lock (1) to release locking of lock lever (2).
    2. Turn lock lever to arrow direction until it stops.
      Fig 1: Disconnecting Connectors From ECM
      G06868175Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove battery tray with ECM.
  4. Remove ECM (1) from battery tray by removing its mounting nuts (2).
    Fig 2: Identifying Battery Tray With ECM
    G06868176Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals