October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Engine Coolant Temperature (ECT) Sensor Removal and Installation: Installation

Reference: ENGINE COOLANT TEMPERATURE (ECT) SENSOR INSPECTION

Reverse removal procedure noting the following.

Clean mating surfaces of ECT sensor and water outlet cap.
Check O-ring for damage and replace, if necessary.
Tighten ECT sensor (1) to specified torque.
Tightening torque

ECT sensor (a): 12.5 N.m (1.25 kg-m, 9.0 lbf-ft)

Fig 1: Locating ECT Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Connect connector to ECT sensor securely.
Refill coolant. See COOLING SYSTEM REFILLING .