Air Bag - Driver's - Remove And Replace: Notes
Last modified: 18/12/2020 10:43:07
WARNING:
Make sure 12V power has been disconnected for at least 2 minutes before disconnecting electrical harnesses from SRS components (sensors, modules, airbags, etc.). Failure to do so can result in unintended safety system behaviors. For more information on SRS precautions, see Air Bag and Supplementary Restraint System (SRS) Precautions
.
WARNING:
If the 12V power supply is disconnected, do not attempt to open the front doors with door glass in closed position. Failure to follow this instruction could result in door glass shatter.
NOTE:
Before disconnecting the 12V power supply, make sure that the driver's door window is fully open. Failure to follow this instruction could result in vehicle lockout.
NOTE:
In the event of an airbag or seat belt tensioner deployment, certain airbag and seat belt components must be replaced, and other components must be inspected for damage. Refer to SRS INSPECTION AND COMPONENT REPLACEMENT
for a specific list of items that must be inspected and replaced.