Buckle Assembly - 3rd Row - Remove And Replace: Installation

Installation procedure is the reverse of removal, except for the following:

Install a new bolt and nut that secure the seatbelt buckle assembly to the seat frame.

If the component was replaced due to an internal failure:

1. Connect a laptop with Toolbox 3 to the vehicle.
2. Unlock the gateway. See Gateway Unlock .
3. In Toolbox 3, click the Tools  tab, type "DTC" into the search field, click DTCs  , and then select SDM or RCM depending on the Restraint Control Type of the vehicle
4. Click Read DTCs to display the DTCs.
5. Click Clear DTCs to clear the DTCs.