LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Body -- Model S) >> Body Panels >> Liftgate Assembly - Remove And Install >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Assembly - Remove And Install: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.

Installation procedure is the reverse of removal, except for the following:

  1. Remove the old sealant from the liftgate hinges and body.
  2. Align the liftgate hinges to the marked locations.
  3. Check the alignment of the liftgate to the body and adjust as necessary.
  4. Once the hinge nuts are tightened, apply sealant around the hinges. Refer to SB-13-10-004, "Liftgate Hinge Sealing".
scientia non olet · About LEMON Manuals