October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Bushing -- Front Drive Unit -- RH - Remove and Replace: Remove
- Remove the front subframe assembly from the vehicle.
- Install the bushing tool on the RH front drive unit bushing.
NOTE:
Use cups "K", "B", and "I" when assembling the special tool, as shown.
NOTE:
Other assemblies hidden for clarity
 Courtesy of TESLA, INC.
|
- Turn the bearing-side bushing tool nut with a wrench while holding the opposite nut in place.
CAUTION:
Apply torque only to the bearing-side bushing tool nut.
NOTE:
Apply torque only to the nut highlighted red
 Courtesy of TESLA, INC.
|
- When the bushing has been pushed out of the front drive unit, separate the bushing tool, and then remove the bushing.
 Courtesy of TESLA, INC.
|