Steering Column And Wheel - Steering Wheel, Lower Spoke Cover - Remove And Replace: Install
- Position the lower spoke cover to the steering wheel, and then install the locator clips (x2) that attach the lower spoke cover to the steering wheel.
- Install the harness to the lower spoke cover harness bracket.
- Install the bolts (x4) that attach the lower spoke cover to the back of the steering wheel.
3.7 N.m (2.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless 1/4 in Dr Ratchet
- Torx T20 socket
- Install the screws (x2) that attach the lower spoke cover to the front of the steering wheel.
1 N.m (.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless 1/4 in Dr Ratchet
- Torx T8 bit
- 4 in extension
- Install the airbag bracket bolts (x4) to the steering wheel, and then connect the connector.
3.7 N.m (2.7 lbs-ft)
NOTE: Before installing the bolts, place the springs on the steering wheel bracket.Tip: Use of the following tool(s) is recommended:
- Cordless 1/4 in Dr Ratchet
- Torx T30 socket
- 4 in extension
- Install the steering wheel. See STEERING COLUMN AND WHEEL - STEERING WHEEL - PUR LEATHER - REMOVE AND REPLACE .
- Install the driver airbag. See FRONT AIR BAGS - DRIVER AIRBAG ASSEMBLY - REMOVE AND REPLACE .
- Connect the LV power. See LV Battery - Li-Ion - Disconnect And Connect .
- Install the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .