Throttle Positioner Adjustment
With engine warmed up, pull off thermo-sensor connector and adjust engine idling to specified RPM. See Tune-Up Charts . Disconnect vacuum hose from throttle positioner and set throttle positioner to "ON" position. Using throttle positioner adjusting screw, set RPM to speed specified in following chart. Reconnect vacuum hose and thermo-sensor connector.
Throttle Positioner Setting (RPM)
| Engine | (1) Manual Trans. | (1) Auto. Trans. | ||
|---|---|---|---|---|
| 3K-C | 1500 | |||
| 2T-C & 18R-C | 1400 | 1400 | ||
| 4M | 1300 | 1200 | ||
| F | 1200 | |||
|
||||