All Other Models
If toe-in is not to specifications, loosen steering link (tie rod) clamping bolts and rotate each adjustable sleeve same amount to obtain correct toe-in. Tighten clamping bolts and make sure clamp slots are aligned with adjusting tube slots.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| Corolla | ||||||
| 1200 Sedan | 2±1/3 | 5/6±1/3 | 3/64 to 13/64 | 38 to 41 | 30 to 36 | |
| 1200 Wagon | 1 2/3±1/3 | 5/6±1/3 | 3/64 to 13/64 | 38 to 41 | 30 to 36 | |
| 1600 | 1 7/8±3/8 | 1±1/2 | 3/64 to 13/64 | 38 to 41 | 27 to 33 | |
| Corona | 5/6±1/2 | 1/2±1/2 | 3/64 to 7/64 | 36 to 38 | 31 | |
| Corona Mk II | ||||||
| RX Sedan & HT | 1/4±1/2 | 1±1/2 | 5/32 to 15/64 | 36 to 38 | 32 | |
| RX & MX Wagon | 2/3±1/2 | 1±1/2 | 15/32 to 15/64 | 36 to 38 | 32 | |
| MX Sedan & HT | 5/12±1/2 | 1±1/2 | 5/32 to 15/64 | 36 to 38 | 32 | |
| Celica | 1±1/2 | 1±1/2 | 13/64 to 9/32 | 38 | 31 | |
| Hi-Lux | 1/2±3/4 | 1±3/4 | 5/64 to 9/32 | 36 to 39 | 27 to 31 | |
| Land Cruiser | 1 | 1 | 1/8 to 13/64 | 30 | 23 | |