October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Cut Deceleration System
- Connect tachometer to engine. Start and warm engine to normal operating temperature.
- Disconnect wiring connector from throttle position sensor. Using a jumper wire, short-circuit terminals TL and IDL on wiring connector.
- Slowly raise engine speed and watch tachometer. Tachometer should fluctuate between 1900-1600 RPM (Auto. Trans.) or 2000-1600 RPM (Man. Trans.). If not check throttle position sensor and ECU.