LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1984 >> Tercel Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starter - Direct Drive >> Testing >> Solenoid Tests >> Pull-In Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pull-In Test

Connect test leads to starter. See Figure. Connect battery negative cable to starter body and "C" terminal. Battery positive lead is connected to terminal "50". If starter plunger jumps out, pull-in coil is satisfactory.

scientia non olet · About LEMON Manuals