Steering Column: Installation

Install steering column in vehicle and tighten column bracket bolts finger tight. Install column hole cover bolts. Tighten column bracket bolts. Attach column shift linkage (if equipped).
Ensure alignment marks are aligned on universal joints, then tighten clamp bolts. Install turn signal or combination switch. Install bracket covers, dash panels and pads. Install air ducts (if equipped).
Install steering wheel and steering wheel pad. Ensure alignment marks on steering shaft and steering wheel are aligned.

Fig 1: Expl View of Land Cruiser, Pickup, Van & 4 Runner Steer Col

Fig 2: Exploded View of Column Shift Steering Column