Wheel Alignment Procedures

WARNING: This page is about a different car, the 1986 Toyota Van. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Caster adjustment. To adjust caster, lengthen or shorten strut rod as shown.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Camber adjustment. Rotate eccentric cam bolt to increase or decrease camber.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Toe adjustment. To adjust, turn eccentric to desired setting.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Caster adjustment. Change caster angle by adding/subtracting shims where shown.

Fig 5: Camber adjustment. To increase or decrease camber setting, turn eccentric left or right.