Wheel Alignment Specifications
WARNING: This page is about a different car, the 1986 Toyota Cressida. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Wagon | ||||
| Front (See Figure) | ||||
| Camber in Degrees | ||||
| Fraction | 7/16 +/- 3/4 | |||
| Decimal | .44 +/- .75 | |||
| Caster in Degrees | ||||
| Fraction | 4 1/4 +/- 3/4 | |||
| Decimal | 4.25 +/- .75 | |||
| Toe-In in Inches | ||||
| Fraction | 3/32 +/- 3/32 | |||
| Decimal | .09 +/- .09 | |||
| Toe-In in Degrees | ||||
| Fraction | 3/16 +/- 3/16 | |||
| Decimal | .19 +/- .19 | |||
| Toe-Out in Turns | ||||
| Inner | 38° | |||
| Outer | 38° | |||
| Steering Axis Inclination (SAI) | 10 9/16° | |||
| Except Wagon | ||||
| Front (See Figure) | ||||
| Camber in Degrees | ||||
| Fraction | 7/16 +/- 3/4 | |||
| Decimal | .44 +/- .75 | |||
| Caster in Degrees | ||||
| Fraction | 4 7/8 +/- 3/4 | |||
| Decimal | 4.88 +/- .75 | |||
| Toe-In in Inches | ||||
| Fraction | 3/32 +/- 3/32 | |||
| Decimal | .09 +/- .09 | |||
| Toe-In in Degrees | ||||
| Fraction | 3/16 +/- 3/16 | |||
| Decimal | .19 +/- .19 | |||
| Toe-Out in Turns | ||||
| Inner | 38° | |||
| Outer | 38° | |||
| Steering Axis Inclination (SAI) | 10 9/16° | |||
| Rear (See Figure) | ||||
| Camber in Degrees | ||||
| Fraction | -7/16 +/- 1/2 | |||
| Decimal | -.44 +/- .5 | |||