LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1988 >> 4Runner Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostics >> Diagnostic Routine >> Power Source Circuit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Source Circuit

Turn ignition on. Check "GAUGE" fuse ("ECU-IG" on Camry, Celica, Cressida, Supra, Tercel and Van, "WIPER" on Pickup and 4Runner, and "TURN GAUGE" on MR2). If fuse is blown, replace fuse and recheck system. If fuse blows again, check for short circuit between fuse and terminal No. 2 of main switch (terminal 16 of computer connector terminal on MR2). See Fig 1. Also inspect main switch.

Fig 1: Main Switch Connector Terminal Identification
G102902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002