Removal (Pickup & 4Runner 3VZ-E)

Disconnect spark plug wires. Disconnect distributor connector. Remove distributor cap and dustproof packing. Set No. 1 cylinder to TDC. Ensure distributor rotor points correctly. See Fig 2. Remove hold-down bolt. Remove distributor.

Fig 1: Aligning Rotor Tooth With Signal Generator (Pickup & 4Runner 22R & 22R-E)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Aligning Rotor for Distributor Removal (Pickup & 4Runner 3VZ-E)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002