Setting The System

1. Turn the ignition key to the LOCK position.
2. Have all passengers get out of the vehicle.
3. Close and lock all the doors, back hatch and hood.
4. After making sure the indicator light starts flashing, you may leave the vehicle.

The indicator light will come on when all the doors, back hatch and hood are closed and locked.

As the doors are locked, the system will give you a preparation time of 30 seconds before the setting, during which the doors, back hatch and hood may be opened to prepare for the setting.

Be careful not to use the key when opening either door. This will cancel the system.

The system will automatically be set after the preparation time passes. The indicator light will flash to show the system is set. If any of the doors, back hatch and hood is open at that time, the setting is interrupted until it is closed and locked.

Never leave anyone in the vehicle when you set the system, because unlocking from the inside will activate the system.