LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1990 >> Camry Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - EFI >> Retrieving Trouble Codes >> Clearing Trouble Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clearing Trouble Codes

  1. After repairs are performed, clear ECU memory of all stored trouble codes. To clear memory, turn ignition off and remove EFI (15-amp) fuse from fuse block for 30 seconds or more.
  2. Fuse block is located in engine compartment fuse/relay box. See CLEARING CODES  table for fuse.
  3. Depending on ambient temperature, fuse may need to be removed for more than 30 seconds. Replace fuse and exit diagnostic mode. Codes can also be cleared by disconnecting vehicle battery. However, other memory functions, such as clock, radio, etc., will also need to be reset.
CLEARING CODES

Application Fuse (Amperage)
Camry EFI (15)
scientia non olet · About LEMON Manuals