Time Lag Test: Notes
NOTE:
Perform test with fluid at normal operating temperature of 122-176°F (50-80°C). Wait one minute between tests. Record 3 measurements and use average value.
- If selector lever is actuated with engine idling, a time lag will be noted before shock can be felt. Apply parking brake and block front and rear wheels. Start engine and check idle speed. See IDLE SPEED SPECIFICATIONS .IDLE SPEED SPECIFICATIONS
Application RPM Corolla 650-750 Nova 650-750 Prizm 700 Tercel 800 - Move selector lever from "N" to "D" position. Measure time required for shock to be felt. Time lag must be less than 1.2 seconds. Repeat procedure, shifting from "N" to "R" position. Time lag must be less than 1.5 seconds.