Vacuum Switch Check: Tercel
- Disconnect vacuum switch electrical connector and vacuum hose. See Figure & 22. Using an ohmmeter, connect ohmmeter leads between vacuum switch terminals. Continuity should not be present.
- Apply 2.76 in. Hg of vacuum or less to vacuum switch No. 1. Ohmmeter should indicate continuity. On California models, 2 vacuum switches are used. Repeat testing procedure on vacuum switch No. 2, except on M/T models, apply 17.13 in. Hg or more and on A/T models, apply 14.37 in. Hg or more. If vacuum switch does not function as described, replace switch.