Wheel Alignment Specifications
WARNING: This page is about a different car, the 1990 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (COROLLA)
| Application | Fraction | Decimal | |||
|---|---|---|---|---|---|
| Camber (Degrees) | |||||
| Front | -11/64 ± 3/4 | .172 ± .750 | |||
| Rear | |||||
| 4A-F Engine | |||||
| Coupe | -43/64 ± 3/4 | -.672 ± .750 | |||
| Except Coupe | -37/64 ± 3/4 | -.578 ± .750 | |||
| 4A-GE Engine | -43/64 ± 3/4 | -.672 ± .750 | |||
| Caster (Degrees) | |||||
| 4A-F Engine | |||||
| Coupe | 1 1/2 ± 3/4 | 1.500 ± .750 | |||
| Except Coupe | 1 13/64 ± 3/4 | 1.203 ± .750 | |||
| 4A-GE Engine | 1 13/64 ± 3/4 | 1.203 ± .750 | |||
| Steering Axis Inclination (Degrees) | |||||
| 4A-F Engine | 12 43/64 ± 3/4 | 12.672 ± .750 | |||
| 4A-GE Engine | 12 1/2 ± 3/4 | 12.500 ± .750 | |||
| Toe-In (Inches) | |||||
| Front | 1/32 ± 1/2 | .031 ± .031 | |||
| Rear | 5/32 ± 1/2 | .156 ± .031 | |||
| Turning Angle (Degrees) | |||||
| 4A-F (Without PS) | |||||
| Inside Wheel | 38 1/2 | 38.500 | |||
| Outside Wheel | 33 | 33 | |||
| 4A-F (With PS) | |||||
| Inside Wheel | 37 1/2 | 37.500 | |||
| Outside Wheel | 32 1/2 | 32.500 | |||
| 4A-GE (Without PS) | |||||
| Inside Wheel | 37 1/2 | 37.500 | |||
| Outside Wheel | 32 1/2 | 32.500 | |||
| 4A-GE (With PS) | |||||
| Inside Wheel | 37 | 32 | |||
| Outside Wheel | 32 | 32 | |||