LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1991 >> Camry Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Distributor >> Installation (2.0L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (2.0L)

  1. Set No. 1 cylinder to TDC of compression stroke. Install new "O" ring on distributor housing. Coat "O" ring with oil. Align cutout marks of coupling with line on housing. See Figure.
  2. Insert distributor, aligning center of distributor flange with bolt hole on cylinder head. Connect distributor wiring connector. Install spark plug wires. Connect negative battery cable. Set ignition timing. Tighten distributor hold-down bolts. See TORQUE SPECIFICATIONS at end of article.
scientia non olet · About LEMON Manuals