Installation (2.5L)
- Set No. 1 cylinder to TDC of compression stroke. Install new "O" ring on distributor housing. Coat "O" ring with oil. Align cutout marks of coupling and housing. See Fig 1.
- Insert distributor, aligning line of housing with distributor bearing cutout. Connect distributor wiring connector. Install spark plug wires. Connect negative battery cable. Install air cleaner cap, airflow meter and air cleaner hose. Set ignition timing. Tighten distributor hold-down bolts. See TORQUE SPECIFICATIONS at end of article.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002