LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1991 >> Camry Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE. Disconnect and plug fuel lines. Drain fuel and remove fuel tank. Remove screws securing fuel pump and bracket assembly to fuel tank. Remove fuel pump and bracket assembly.
  2. Pull lower end of fuel pump (with filter) from bracket. Remove 2 nuts securing fuel pump wires to fuel pump. Disconnect wires. Disconnect fuel hose from fuel pump. Remove fuel pump. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals