Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Distributor Hold-Down Bolt | |||
| 2.0L | 29 (39) | ||
| 2.2L | 9 (12) | ||
| Air Intake Connector Bracket-To-Throttle Body Bolts | 14 (19) | ||
| Cold Start Injector Pipe-To-Cold Start Injector | 13 (18) | ||
| Cold Start Injector-To-Fuel Rail Bolts | 13 (18) | ||
| Crossmember-To-Body Bolts | 22 (29) | ||
| Fuel Inlet Hose-To-Fuel Filter | 22 (29) | ||
| Throttle Body Bolt/Nut | 14 (19) | ||
| Turbocharger | |||
| Air By-Pass Valve-To-Air Tube | 14 (19) | ||
| Air Tube Stay-To-Air Tube | 14 (19) | ||
| Air Tube Stay-To-Cylinder Head | 14 (19) | ||
| Oil Pipe-To-Cylinder Block | |||
| Bolt | 32 (43) | ||
| Union Bolt | 38 (51) | ||
| Oil Pipe-To-Turbocharger | 13 (17) | ||
| Turbine Outlet Elbow-To-Turbocharger Bolts | 47 (64) | ||
| Turbocharger Stay-To-Cylinder Block Bolts | 43 (59) | ||
| Turbocharger-To-Exhaust Manifold Bolts | 47 (64) | ||
| Turbocharger Stay-To-Turbocharger Bolts | 51 (69) | ||
| INCH Lbs. (N.m) | |||
| Air Intake Connector Bracket-To-Cylinder Head | 69 (7.8) | ||
| Cold Start Injector-To-Intake Manifold | 52 (5.9) | ||
| Injector Cover-To-Fuel Rail | 69 (7.8) | ||
| Turbocharger | |||
| Side Bearing Housing Plate-To-Turbocharger Bolts | 108 (12) | ||
| Turbo Water Pipe-To-Turbocharger Bolts | 108 (12) | ||