LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1991 >> Pickup Base, W55 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor (3.0L) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Distributor (3.0L): Removal

  1. Disconnect negative battery cable. Disconnect spark plug wires. Disconnect distributor connector. Remove distributor cap and dust-proof packing.
  2. Set No. 1 cylinder to TDC of compression strike. Ensure distributor rotor points in direction shown. See Fig 1. Remove distributor hold-down bolt. Remove distributor. Remove "O" ring from distributor housing and discard.
    Fig 1: Aligning Rotor for Distributor Removal (3.0L)
    G119507Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002